Tips For Replacing a Window Handle
It is easy to replace your window handle in the convenience of your own home. Use these helpful tips to ensure a smooth operation and great look.
Start by removing the screws to reveal the screws within the uPVC window handle. Measure the spindle to make sure you are getting the correct size replacement.
1. Measure the Spindle length
It is crucial to ensure the correct size of the spindle when replacing the window handle. It can affect the tightness or elasticity of the handle, as well as whether the handle will lock properly into the frame of the window. The spindle is a metal shaft that connects the handle and to the lock inside the window frame. The spindle can be found in the standard 8mm industry cross-section or older versions that measure 9mm. Modern industry standards are 8mm, but it wasn't always the case. It is important to confirm the measurements before buying a new handle.
The easiest way to measure the spindle length is to remove the handle that is currently in place This can be accomplished by turning it into an open position and then removing the two screws (which may be hidden behind plastic caps that will have to be removed) that retain the handle. Once the handle is removed, measure the distance from the base to the point at which it ends. This will provide you with the measurements required to buy a new one.
There are many choices when it comes to choosing a new window handle, from sleek chrome that blends in with a modern home, to traditional brass with a burnished finish that looks great in restored Georgian rooms, or even the more classic Tudor cottages with curved monkey tail latches! There are a lot of options, but the most important thing is to select the style that is appropriate to your home's style.
Espag handles are typically fitted to uPVC window frames and are always the same size with a 43mm center. Cockspur handles range between 58mm and 62mm, but luckily there are replacements available for both sizes. Window handles made of Cadenza have distinct dimensions because they have an bent blade that is used to operate the multi-point lock mechanism within the window.
When choosing a window handle it is important to consider the hand you use to open your door. Inline Espag window handles aren't handed and can be utilized on either left or right handed windows. Cranked window handles are hand-operated and are only used on windows that open in only one direction.
2. Take the handle off
A window handle that falls out is a frustrating experience, regardless of whether the handle is damaged or worn out. The good news is that replacing the uPVC window handle is a straightforward task that you can complete yourself. All you need are the most basic tools and some time to complete the task.
You must first open the window, and then ensure that it's not locked. Then, remove the screw caps holding the handle in place. After these have been removed, you can begin to work on removing the handle itself.
The handle is attached to a spindle within the window frame. Depending on the type it is held in place either by a screw or a pin. The most commonly used handles are the inline Espagnolette and the cockspur handles. Both these types of handles are employed on casement windows, which includes aluminum windows. They can be locked by using keys to prevent the opening of the window from the outside or you can lock them by turning the handle clockwise.
To remove the handle you will need to use a screwdriver with a flat blade to remove the clip that holds the handle in place. Once this is released, the handle will slide off the spindle. When the handle is removed, you will need to measure the length of the spindle and ensure that your new handle is compatible with this size.
Once you have the proper size, you can now screw the new handle in the correct position. It is crucial to make sure that the handle is properly attached and rotates in the correct direction (clockwise if the handle is open and counterclockwise if handle is closed). It is essential to make sure that the handle hasn't been installed upside down.
Replace the cap screws. After you've done this, you can test the handle to ensure that it functions correctly. It is also recommended to test the locking mechanism by moving the handle to the locked position, and then back to the locked position.
3. Remove the Screws
A uPVC window handle is an integral element of any home and is usually the first thing to exhibit signs of wear and tear or damage. This could be due to natural factors, regular use, or even damage caused by criminals looking to gain access to your home. However, upvc door handle replacement will solve the issue and prevent the issue from happening again.
UPVC handles can also be difficult to remove if the locking mechanisms are not functioning correctly. Often, the problem is solved by replacing the multipoint lock rather than the entire handle and it's worthwhile to check this out since it can save you money.
Once you've removed the old handle, you'll have to take off the screws that were that held it in place. The screws are typically located on the inside of the base of the handle. You may require an screwdriver to do this, and it's important to not over tighten, as this could cause the handle to loosen.
You will then need to locate the fixing screws or pins that hold the new handle in place. Again these are likely to be located on the inside of the handle base and you'll need a screwdriver or a pair of pliers in order to remove the screws. After you have removed them, you'll be required to replace the caps on the screws in the event that you want to do so and test the new handle to make sure it's working properly.
Install the handle by adjusting the spindle with the window's cutout mechanism. Then, screw it into. Make sure the handle is in the open position and that any screws are secured before replacing the screws' covers, should you wish to do so. After this is done, you're done and can enjoy your newly replaced window handle. This should help you avoid costly window and door replacements in the future. If you would like more help with this or any other aspect of your uPVC windows do not hesitate to contact us.
4. Fit the New Handle
Whether you're replacing a broken handle or simply making it more modern the process is simple and can be completed in just a few steps. The most important thing is to identify the type of handle, measure its spindle and know what tools you'll need to complete the job. Safety is always the primary priority when working with tools and windows. It is also essential to take your time and follow the steps with care to ensure you have a functioning handle that is safe to use.
To begin, find the screws that hold the window handle in place. Take them off while firmly gripping the handle to stop it from falling and causing injury. Once the screws have been removed, you can place them in a secure location to be replaced later.
Once the old handle has been removed, you can now begin fitting your new handle. The handle needs to be fitted perfectly in order to function correctly and keep the window in its closed position. The next step is to slide the square metal bar on the back of the handle into the hole in your window mechanism, making sure it fits securely.
Once your new handle is installed, the final thing to do is to replace the screw caps and check to see if it functions. If you're not satisfied with the outcome or if the window does not open and close as it should the next step is to call our experts who can help.
Almost all UK homes are equipped with uPVC Windows. This means that a lot of them will require replacement at some point because of wear and tear or breakage. Anyone with a little DIY experience can easily complete the task. The most important factor in the success of this procedure is making sure you're using a handle which matches your existing window in terms of dimensions and style. Contact us if you are unsure about the type of handle that you need. They'll be able guide you through all the possibilities.